Timer Mode; Switch-On Timer - Grundig Ovation CDS 6380 S User Manual

TIMER MODE

e
e
Your device has three timer modes:
– The switch-on timer, which switches the device on at the set time and wakes
you with an alarm or music.
– The reminder timer, reminding you by sounding an alarm at a time you set.
– The sleep-timer, which switches the machine off at a time you set.

Switch-on timer

Setting the switch-on timer
Notes:
The clock on the device must already be set. During the setting, if no button is
pushed for more than 10 seconds, the device ends the procedure auto-
matically. You then have to start again.
1
Press »INTRO/REP./TIMER« on the remote control for longer with the
device switched off.
– Display: »
2
Set the hours for switching on using »
3
Press »INTRO/REP./TIMER« on the remote control.
– Display: »
4
Set the minutes for switching on using »
5
Press »INTRO/REP./TIMER« on the remote control.
– Display: »
6
Set the input source (signal, radio station or CD) using »
«.
DOWN
Note:
If you select CD, make sure that a CD has been inserted.
7
If you select Tuner, set the desired preset station using »
» s s s 6 «.
8
Press »INTRO/REP./TIMER« on the remote control.
9
Set the volume using
10
End the settings by pressing »INTRO/REP./TIMER« on the remote control.
– Display: for example »
– The device switches on at the set time with the selected signal source
(maximum alarm duration 90 minutes).
Note:
The sound sources of the alarm types, signal, radio station and CD are dyna-
mic, and so the volume increases continually from zero onwards until an
individually set maximum volume is reached. If the volume control
»– VOLUME +
will not increase any further.
__________________________________________________________________
« and the hour display flashes.
TUNING UP/DOWN
« and the minutes display flashes.
TUNING UP/DOWN
e «, » « or »
»– VOLUME +
«.
e «, the day and time.
« is used during the alarm in tuner or CD mode, the volume
«.
«.
«.
TUNING UP/
5a § « or
23