Rds Station Service - Grundig Ovation CDS 6380 S User Manual

TUNER MODE
PRESET
!
f
PRESET
!
MHz
f
PRESET
!
f
_____________________________________________________________________________

RDS station service

RDS (Radio Data System) is an information system which is transmitted additio-
nally by most FM stations.
If the device is currently receiving an RDS station, it displays the station name,
for example »
Note:
It may take some time before all the RDS information is available.
Searching for RDS stations
1
Search for the desired RDS station by repeatedly pressing »
» s s s 6 « until an RDS station is received and »
display.
– After a short time the station name appears if the reception strength is
sufficient.
Calling up RDS information
When an RDS station is being received, the frequency is displayed briefly and
then the station name appears continuously.
1
Press the »DISPLAY« once on the remote control.
– The wavelength and the frequency appear briefly in the display.
2
Press »DISPLAY« on the remote control again.
– The day and time appear briefly in the display.
3
Press »DISPLAY« on the remote control a third time.
– The station name is displayed continuously once again.
«, and » f «.
5 a § « or
f « appears in the
17