Switch-On Timer; Reminder Timer - Grundig Ovation CDS 6380 S User Manual

e
WEC
NAP
24 24
TIMER MODE
______________________________________________________________________________
Interrupting the alarm
1
Press »SNOOZE« on the device while the alarm is sounding.
– The alarm signal (signal tone, radio station or CD) stops.
– The alarm goes on again at 5-minute intervals (alarm duration – 90 minutes).
Cancelling the alarm for the day
1
Switch the device off by pressing »ON/OFF« when the alarm is sounding.
– The switch-on timer remains activated for the next day.
Interrupting the switch-on timer for the weekend
You can deactivate the switch-on timer for the weekend, i.e. Saturday and Sunday
with this function.
1
If the switch-on timer is activated, press »WEC« on the remote control.
– Display: »
– The switch-on timer is deactivated for the weekend.
2
To reactivate the general switch-on timer press »WEC« on the remote control.
– Display: »
Activating and deactivating switch on timer
1
To deactivate the switch-on timer in stand-by mode press
TIMER« briefly on the remote control.
– Display: »
– The switch-on timer is deactivated, the set alarm time is stored.
2
To activate the switch-on timer in stand-by mode, press
TIMER« briefly on the remote control again.
– Display: »

Reminder timer

Setting the reminder timer
1
To activate the function press »NAP« briefly on the remote control.
– Display: »
2
Enter the required time (in 10 minute intervals from 10 to 120 minutes) by
pressing »NAP« on the remote control.
– Display: »NAP« and for 3 seconds, for example »
– After the selected time a signal sounds and »NAP« flashes in the display.
Displaying the remaining reminder time
1
Press »NAP« briefly on the remote control.
– Display: for 3 seconds, for example »
«.
WEC
« disappears from the display.
WEC
« or » « disappear.
e
« or » «.
e
«.
»INTRO/REP./
»INTRO/REP./
«.
« and »NAP«.