Grundig Ovation CDS 6380 S User Manual page 21

CD MODE
c
TRACK
PROG
yxc
TRACK
vbn
m,.
-<
c
TRACK
v
m
-
PROG
y
TRACK
b
m .
-<
PROG
____________________________________________________________________________________
4
Press » PROG./RAND./TIME« on the remote control to store the track.
– Display: The stored track appears in the number field. »TRACK
» PROG« flashes again.
Note:
Repeat steps 3 and 4 to program more tracks.
5
To start playback of the track memory, press
– Playback begins with the first programmed track.
Note:
During the setting, if no button is pushed for more than 10 seconds, the device
ends the procedure automatically. You then have to start again.
Changing from the track memory to normal playback
1
Press » « once during playback of the play list.
7
2
Press »CD II« to start normal playback.
– Playback begins with the first track.
Changing from normal playback to the track memory
1
Press » « once during normal playback.
7
2
Call up the play list by pressing » PROG./RAND./TIME« on the remote
control.
– Display: » PROG« flashes.
3
Start the track memory by pressing
– Playback begins with the first programmed track.
Changing the track selection
1
Press »PROG./RAND./TIME« on the remote control when the CD is in the
STOP position.
2
To replace a stored track, keep pressing »PROG./RAND./TIME« on the
remote control, until its number appears in the display.
3
Press » 5 a § « or » s s s 6
4
Press »PROG./RAND./TIME« on the remote control to store the new
tracks.
»CD II«.
»CD II«.
« to select the new track number.
«,
21