Setting Preferences; Choosing A Language - Strong SRT 5024 User Manual

Setting preferences

You can set:
• the language of the menus, audio, subtitles and teletext
• the colour scheme of the menus
• a password to restrict access to certain programs and to the menus of the SRT 5024.
NOTE: The subtitle language or teletext language you choose will only have effect if the
broadcaster you have tuned into is broadcasting subtitles and teletext in that language.

Choosing a language

1. If the Main Menu is not displayed, press MENU on the remote control.
2. If the Preference option is not highlighted, press VOL
3. If Language is not highlighted in the Preference menu, press CH ▼or CH ▲ on the remote
control until it is.
4. Press OK on the remote control.
The Language window appears.
5. Press CH ▼or CH ▲ until the language option you want to change is highlighted, and then press
OK.
6. If you chose Menu Language or Audio Language, a submenu of languages appears. Press CH
▼or CH ▲ until the language you want is highlighted and then press OK.
Note that you can close a menu or submenu by pressing MENU on the remote control. This
returns you to the previous menu without accepting whatever menu option was selected at the
time.
7. If you chose Subtitle Language or Teletext Language, you have two further options:
• Define: Highlight this option and press OK to display a submenu of languages. Press CH ▼or
CH ▲ until the language you want is highlighted and then press OK.
• Follow Audio: Highlight this option and press OK to choose the same language as your
Audio Language setting.
or VOL on the remote control until it is.
15