Table of Contents
Advertisement
4. Press OK on the remote control to zoom in.
5. Press MENU or EXIT again to cancel zooming.
Re-scanning for channels and stations
If you have moved locations, deleted channels or stations, or if new channels and stations have
become available, you will need to rescan. Two scanning options are available:
•
Automatic
•
Manual
Automatic Scanning
1. Press Menu on the remote control to display the Main Menu.
2. Press VOL
or VOL
3. If Auto Searching is not highlighted in the Scan sub-menu, press CH ▼or CH ▲ on the remote
control.
4. Press OK.
The SRT 5024 scans for channels and stations. As it finds them, it displays them (grouped by
broadcaster). When scanning is complete, the Main Menu re-appears. One of the TV channels
detected will appear on the menu screen.
5. Press MENU or EXIT to return to normal viewing.
Manual Scanning
1. If the Main Menu is not displayed, press the MENU key on the remote control.
2. If the Scan option is not highlighted, press VOL
3. Press CH ▼or CH ▲ on the remote control to highlight Manual Scan.
4. Press OK on the remote control.
5. Select an option and enter the details of the channel you want to search for. (You can enter
the transponder frequency, channel number or bandwidth that identifies the channel you want
to search for).
6. When you have entered values that identify the channel you are searching for, press the SUB
button (the red button) on the remote control.
If the channel can be found, the details are shown on the screen and saved.
7. Press MENU to return to the Main Menu or EXIT to return to normal viewing.
Organising channels
The Edit option on the Main Menu enables you to:
•
lock, skip, delete, re-sort and rename channels
•
create a list of favourite channels
•
lock, skip, rename and sort your favourite channels.
until Scan is highlighted.
or VOL
on the remote control until it is.
24
Advertisement
Table of Contents
