PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
may have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
M8 Nylon
Locknut (81)
M6 Washer (96)
M8 Washer (84)
M10 Washer (83)
Shoulder Bolt (101)
M4 x 13mm
Self-tapping
Screw (94)
M6 x 16mm
Screw (95)
M8 x 10mm
Set Screw (99)
M8 x 18mm
Bolt (90)
M10 x 20mm
Bolt (89)
M8 x 22mm
M10 x 25mm
Bolt (86)
M10 x 75mm Bolt (39)
M8 x 70mm Bolt (93)
M10 x 68mm Bolt (85)
M8 x 65mm Bolt (79)
M10 x 62mm Bolt (88)
M10 x 62mm Carriage Bolt (97)
M6 x 63mm Screw (87)
M8 x 60mm Bolt (91)
M10 x 48mm Bolt (92)
M6 x 40mm Screw (100)
5