Table of Contents
Advertisement
Editing the Navigation Utilities
p Touching other than [Import from Disc] al-
lows you to select a background image
stored on the Pioneer DVD Map Disc.
6
Touch a picture you want for the back-
ground.
7
Select how to display the picture.
You can select the following items:
Centre:
Selected picture is displayed at the centre of
the screen.
Repeat:
Selected picture is repeated in a pattern to
cover the whole screen.
The background image starts changing. After
a short while, the new background image ap-
pears.
p When you select images stored on the
Pioneer DVD Map Disc, you cannot select
the layout method.
p When the picture starts to change, do not
turn off the vehicle engine until the mes-
sage appears to indicate that the picture
has finished changing.
8
Touch [Done].
On this screen, you can select the following
items:
Select another Picture:
This is selected when you want to change to
another picture. Return to Step 5.
Change to another background:
Select if you want to successively change the
Splash Screen, AV operation screen back-
grounds or the Navigation backgrounds. Re-
turn to step 3.
p When the navigation system is reset, or the
language setting is changed, the back-
ground picture may change back to the ori-
ginal picture. (There is also a possibility
that the system will revert to the original
picture for some other reason.) If this hap-
pens, set the background picture again.
Setting Vehicle Dynamics
Display
You can change the values displayed by the in-
struments on the left and right of Vehicle Dy-
namics Display.
Until the sensor's initial learning is complete,
only the voltage and clock are displayed.
1
Switch to Vehicle Dynamics Display.
= For details concerning operations, refer to
Switching the current position screen display
mode on page 39.
2
Touch the left or right instrument.
Touch panel keys are displayed.
3
Touch the items you want to display.
You can select the following items:
Voltage:
Displays the power supply and voltage sup-
plied from the battery to this system.
Acceleration:
Displays acceleration in a forward direction. +
sign indicates acceleration while - sign indi-
cates deceleration.
Side Acceleration:
Displays acceleration in a side direction, such
as when turning. + sign indicates a right turn,
while - sign indicates a left turn.
Angular Velocity:
Displays the vehicle's turning angle over one
second (how far it has turned in a second).
Slope:
Displays the vehicle's vertical movement. +
side represents the rising angle, and - side the
falling angle.
Chapter
05
67
Engb
Advertisement
Table of Contents
