Table of Contents
Advertisement
Setting a Route to Your Destination
The following information is displayed on this
screen:
1 Route calculation condition
Displays the conditions set by Route Op-
tions menu by icon.
! Use/avoid motorway
! Use/avoid toll road
! Use/avoid ferry
Displays the inability to fulfill the conditions
by icon.
! Pass through Area to Avoid
! Use toll road although the setting
[Avoid Toll Road] is [On].
! Use Ferry although the setting [Avoid
Ferry] is [On].
2 Distance to your destination
3 Travel time to your destination
p [Avoid Motorway] setting may not be re-
flected, depending on the distance to the
destination.
p You can see other places while displaying a
possible route by scrolling the map.
Touching [Next] moves the next candidate
route to the centre and indicates the map.
4
Touch [Information] to check the infor-
mation on the selected route.
You can also check details of the roads along
the selected route. (If you touch [Back], you
can return to the previous display.)
= About "Route Scroll", refer to Checking the
set route with the map on page 49.
= About "Route Profile", refer to Checking
the set route by text on page 50.
p After the route is calculated, it may take
some time until the detailed route informa-
tion (Route Profile) is displayed.
5
Touch [OK].
The route you selected is accepted, and the
map of your surroundings appears. When you
start driving, the route guidance begins.
p If the above operations are not performed
within 30 seconds after the route calcula-
tion is completed and you have already
started your vehicle, the route selected at
the time is automatically chosen.
Chapter
04
57
Engb
Advertisement
Table of Contents
