Adjusting The Picture; Displaying The Firmware Version; Displaying The Open Source Licences - Pioneer AVH-X5850BT Owner's Manual

System settings
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item.
 Auto (default):
Switches the dimmer to on or off automatically according to
your vehicle's headlight turning on or off.

Manual:
Switches the dimmer to on or off manually.
 Time:
Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day
or night
p You can use this function when "Dimmer Trigger" is set to
"Manual".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following
items.
 Day (default):
Turns the dimmer manually to off.

Night:
Turns the dimmer manually to on.
Setting the dimmer duration
optional
You can adjust the time that the dimmer is turned on or off.
p You can use this function when "Dimmer Trigger" is set to
"Time".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [Dimmer Settings].
3 Touch [Dimmer Duration].
The "Duration Setting" screen appears.
4 Drag the cursors to set the dimmer duration.
 You can also set the dimmer duration touching
or .
Each touch of or moves the cursor back-
wards or forwards in the 15 minute width.
p The default setting is 18:00-6:00 (6:00 PM-6:00 AM).
p When the cursors are placed on the same point, the dimmer
available time is 0 hours.
p When the cursor for off time setting is placed on the left end
and the cursor for on time setting is placed on the right end,
the dimmer available time is 0 hours.
p When the cursor for on time setting is placed on the left end
and the cursor for off time setting is placed on the right end,
the dimmer available time is 24 hours.
p The time display of the dimmer duration adjusting bar is
depending on the clock display setting.
 Refer to Setting the time and date on page 47

Adjusting the picture

You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the handbrake.
1 Display the screen you wish to adjust.
2 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.

Brightness:
Adjusts the black intensity. (–24 to +24)

Contrast:
Adjusts the contrast. (–24 to +24)
 Colour:
Adjusts the colour saturation. (–24 to +24)

Hue:
Adjusts the tone of colour (which colour is emphasised, red
or green). (–24 to +24)
 Dimmer:
Adjusts the brightness of the display. (+1 to +48)

Temperature:
Adjusts the colour temperature, resulting in a better white
balance. (–3 to +3)
p With some pictures, you cannot adjust Hue and Colour.
 When you touch [Rear View], the mode changes
to the selected camera mode. By touching
[Source], [Navi] or [Apps], you can return to the
selected mode.
5 Touch , , , to adjust.
p The adjustments of "Brightness", "Contrast" and "Dimmer"
are stored separately when your vehicle's headlights are off
(daytime) and on (nighttime).
p "Brightness" and "Contrast" are switched automatically
depending on whether the vehicle's headlights are on or off.
p "Dimmer" can be changed the setting or the time to switch
it to on or off.
 Refer to Setting the dimmer on page 38
p The picture adjustment may not be available with some rear
view cameras.
p The setting contents can be memorised separately.
Displaying the firmware
version
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [System Information].
3 Touch [Firmware Information].
The "Firmware Information" screen appears.
Displaying the open source
licences
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
37
2 Touch [System Information].
3 Touch [Licence].
The open source licences of the functions that this product is
equipped with appear.
39