Selecting The Radio Station - Pioneer AVIC-X3II Operation Manual

Dvd multimedia av navigation head unit
Hide thumbs Also See for AVIC-X3II:
Table of Contents

Advertisement

Editing the Navigation Utilities
5
Touch [Back].

Selecting the radio station

The RDS-Tuner of the navigation system auto-
matically tunes to the radio station to receive
available traffic information (RDS-TMC sta-
tion). If reception is poor, you can switch to an-
other station manually. Once the received
radio station is selected, the system automati-
cally tunes to stations that provide traffic infor-
mation according to the location of the
vehicle.
Tuning to a RDS-TMC station with
good reception
1
Touch [Traffic/Info] in NAVI MENU, then
touch [Manual Station Search].
2
Touch [Next].
Available radio stations can be searched auto-
matically. If a radio station with good reception
is found, the tuning mode is stopped.
Store:
Store the current RDS-TMC station in the pre-
set list. If there are already five stations stored
in the list, select one to be overwritten.
p If you want to continue to search for an-
other station, repeat this procedure.
3
Touch [OK].
Switches to the selected RDS-TMC station and
returns to the Information menu.
Selecting from pre-registered RDS-
TMC stations
You can pre-select up to five RDS-TMC stations
(Preset Stations). From the list of the RDS-TMC
stations, you can select the one you want to re-
ceive.
1
Touch [Traffic/Info] in NAVI MENU, then
touch [Manual Station Search].
The list of registered RDS-TMC stations ap-
pears. This list of broadcasting stations (Preset
Stations) cannot be used unless those broad-
casting stations have been stored.
2
Select a radio station on the list.
The currently selected RDS-TMC station
Switching to the selected RDS-TMC station.
Chapter
05
65
Engb

Advertisement

Table of Contents
loading

Table of Contents