Cautions Relating To Auto Reroute In Memory Navi Mode; Tmc Icon During The Memory Navi Mode; Operation Outside The Memorised Area; Positioning Technology - Pioneer AVIC-X3II Operation Manual

Dvd multimedia av navigation head unit
Hide thumbs Also See for AVIC-X3II:
Table of Contents

Advertisement

Appendix
Appendix
! In memory navi mode, map scale data that
cannot be read in the memory cannot be
displayed. Accordingly, the edge of the
map will appear cut off along the point it
was not read into memory. This simply indi-
cates the edge of the map data, and is not
a malfunction.
! If you keep driving or scrolling the map to a
point where the map can no longer be dis-
played, the scale automatically switches to
a range possible to display. If you would
like to continue driving or scrolling the map
at the same scale, set the DVD Map Disc in
the navigation system.
! You cannot reroute to avoid traffic jam or
closure.
! If you continue to drive outside the route
for a while, you may not be able to perform
map matching.
! If you deviate from the route during mem-
ory navi mode, the set route will be re-
routed, but only to return you to the original
route calculated within the memorised
area.
! Although an enlarged map of the intersec-
tion will be displayed, no special motorway
illustration (illustration of motorway junc-
tions) will be displayed.
Cautions relating to auto
reroute in memory navi mode
Auto rerouting in memory navi mode is de-
signed to return you to your original route
wherever possible.
In memory navi mode, persistently deviating
from the route may result in one of the follow-
ing:
! A clearly circuitous route
146
Engb
! Leaving a toll road and returning to the toll
road from where you left it
In the above case, if the set route seems un-
suitable, insert the DVD Map Disc. Setting the
DVD Map Disc to navigation automatically re-
sets the route from your current location to
your destination.
TMC icon during the memory
navi mode
! TMC-related data for only one country can
be memorised. Therefore, if
on the screen when crossing an interna-
tional border, you will need to insert the
disc to use the RDS-TMC function. Touch-
ing
allows you to check the locations
of the traffic information along the route.
However, you cannot perform rerouting.
Operation outside the
memorised area
When the vehicle leaves the memorised area,
the functions will be limited.
! The auto reroute function does not work.
! You can only display a larger scale map.
The map display will automatically change
to a 50 km (or 100 km) scale.
! The map matching function will not be
available. Therefore, the position of your ve-
hicle may be misaligned.
! The navigation guidance will only be avail-
able when arriving at your destination.
Other guidance is not possible (this in-
cludes no display of direction arrows).
To cancel these limitations, insert the DVD
Map Disc to the navigation system.

Positioning Technology

The navigation system accurately measures
your current location by combining the posi-
tioning by GPS and by Dead Reckoning.
appears

Advertisement

Table of Contents
loading

Table of Contents