Destination Search; Guidance; Route Information; Other Function Limitations - Pioneer AVIC-X3II Operation Manual

Dvd multimedia av navigation head unit
Hide thumbs Also See for AVIC-X3II:
Table of Contents

Advertisement

Appendix
Appendix

Destination search

! You cannot search a destination in an area
not stored on the disc using Address
Search, POI Search or Postal Code
Search.
! If you cannot search in a currently selected
country, the system may forcibly switch to
the country selection screen.
! A Motorway Search covers all areas, re-
gardless of the disc on which the informa-
tion is stored.
! If a Vicinity Search is performed on the
border of an area not stored on the disc,
the system will not necessarily select the
nearest facility. (The search will take place
only within the range of areas stored on the
disc.)

Guidance

! When your vehicle approaches an area not
stored on the disc, you will be notified three
times: when the distance to the area not
stored on the disc is 20 km (12 miles),
10 km (6 miles) and 5 km (3 miles) respec-
tively. When your vehicle enters that area, a
caution is given.
! In the areas not stored on the disc, only
guidance for reaching the destination is
provided. No other guidance is given.
! If a route calculation is operated within an
areas not stored on the disc, the route
might not be set from the streets you are
currently driving. Also, if you set the desti-
nation in an area not stored on the disc of
the disc, the system may not be able to set
the route up to the destination.
! If the vehicle deviates from the set route in
an area not stored on the disc, the Auto Re-
route function will not work.
! Even if [Close-up of Junction] is [On], the
display will not switch to an enlarged map
of the junction.
! Even if you drive on the motorway, lane in-
formation, motorway exit numbers and mo-
torway signs will not be displayed.
152
Engb

Route information

! If the set route goes through an area not
stored on the disc, no route profile for that
area will be displayed. (If the set route tra-
verses both an area not stored on the disc
and area stored on the disc, only the route
profile within the area stored on the disc
will be displayed.)
! Route scrolling for an area not stored on
the disc is possible only with a map scale
of 500 m or above.

Other function limitations

Memory mode
! Only data for areas stored on the disc can
be memorised. (Data for areas not stored
on the disc cannot be memorised.)
! If the vehicle enters an area not stored on
the disc, preparation for memory navi
mode will have to be redone after the vehi-
cle returns to an area stored in the disc.
(Preparation for the memory navi mode
starts from the location where the vehicle
re-entered the area stored on the disc.)
Avoid area
! An area not stored on the disc cannot be
set as an Area to Avoid.
p A set Areas to Avoid may be deleted when
the software is updated. If this happens,
the system will automatically try to recover
the deleted information, but data can be re-
covered only for areas stored on the disc.
For items that could not be recovered, a re-
covery process will begin when you set an-
other disc.

Handling and Care of the Disc

Some basic precautions are necessary when
handling your discs.

Advertisement

Table of Contents
loading

Table of Contents