Table of Contents
Advertisement
Using the AV Source (Built-in DVD Drive and Radio)
Radio
Listening to the radio
6
8
9
7
a
1
2
5
These are the basic steps necessary to operate
the radio.
= Switching between the detail information
display and the preset list display on this
page
This unit's AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation.
= Selecting alternative frequencies on page 92
1 Source icon
2 Band indicator
3 Preset number indicator
4 Frequency indicator
5 Preset list or Detail information display
6 LOCAL indicator
7 STEREO indicator
8 Programme service name indicator
3
4
9 PTY indicator
a Current radio text
1
Touch [RADIO] in AV Source screen to
select the radio.
= For details, refer to Selecting an AV source
on page 35.
2
Touch [Band] to select a band.
Touch [Band] repeatedly until the desired
band is displayed: FM1, FM2, FM3 for FM or
MW/LW.
3
To perform manual tuning, touch
or
briefly.
The frequencies move up or down step by
step.
4
To perform seek tuning, keep touching
or
for about one second and re-
lease.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
You can cancel seek tuning by touching either
or
briefly.
If you keep touching
skip broadcasting stations. Seek tuning starts
as soon as you release the keys.
Switching between the detail
information display and the
preset list display
You can switch the left side of the basic screen
according to your preference.
% Touch [Preset] (or [Detail]).
Each touch of [Preset] (or [Detail]) changes
the detail information display or preset list dis-
play.
Chapter
or
you can
89
Engb
07
Advertisement
Table of Contents
