Installing The Programme - Pioneer AVIC-X3II Operation Manual

Dvd multimedia av navigation head unit
Hide thumbs Also See for AVIC-X3II:
Table of Contents

Advertisement

Appendix

Installing the Programme

The programme is installed to the navigation
system using the application disc.
This is not necessary if your dealer al-
ready performed the installation.
When installing the programme, you carry out
the following operations. When all the setup
procedures are completed, you can use the
navigation system.
1 Insert the disc while the vehicle is
parked.
2 Select the language used for the navi-
gation system.
3 Set the time difference.
CAUTION
Once the installation of the programme starts, do
not stop the engine of your vehicle nor switch off
the navigation system until the installation is
completed and the following Map screen with
current position appears.
1
Park your vehicle in a safe place.
Leave the engine on, and make sure that the
handbrake is applied.
2
Insert the Pioneer DVD Map Disc into
the disc loading slot of the navigation sys-
tem.
When the upgraded programme has been
found, installation of the programme starts im-
mediately.
p Do not insert anything other than a disc
into the disc loading slot.
p If you cannot insert a disc completely or if
an inserted disc is not recognised, check
that the label side of the disc is up. Press
EJECT button to eject the disc, and check
the disc for damage before inserting the
disc again.
j
j
3
Touch [Yes/Oui/Ja].
When you start the navigation system for the
first time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the naviga-
tion system. If desired, you can select another
language as shown.
p To keep English, touch [No/Non/Nein].
p When you want to select another language,
touch [Yes/Oui/Ja], and proceed to the
next step.
4
Select the language from the list.
Touch the language you want to use.
p The language selected here is reflected for
the Navigation functions (e.g., Destination
search, etc.) only.
= Refer to Language Selection in System
Options on page 71.
Installation of the programme begins in the
language that you chose.
When the installation is complete, the opening
display appears.
Appendix
141
Engb

Advertisement

Table of Contents
loading

Table of Contents