When Checking Traffic Jam Information Manually - Pioneer AVIC-X3II Operation Manual

Chapter
05 Editing the Navigation Utilities
p When no selection is made, the current
route will be automatically selected after a
short while.
When checking traffic jam
information manually
Touching
check for traffic jam information on your
route. If there is any information about a traffic
jam on your route, a message appears asking
you whether to search for another route to
avoid the traffic jam. If there is no traffic jam
information along the route being guided, it is
announced on screen and by voice.
If there is a traffic jam on the route
When receiving information about a traffic
jam, a message announces the presence of a
traffic jam.
On this screen, you can select the following
items:
Yes:
The route is recalculated taking the traffic jam
into account.
No:
The message disappears, and the map display
reappears.
List:
The list with all traffic information is displayed.
p In the memory navi mode, you can only se-
lect [No].
If there is no traffic jam information
on the route
If there is no traffic jam information, a mes-
sage informing you that there is no traffic jam
information on the route that is shown.
On this screen, you can select the following
items:
List:
The list with all traffic information is displayed.
64
Engb
on the screen allows you to
Back:
The message disappears, and the screen re-
turns to the map screen.
p In the memory navi mode, you can only se-
lect [Back].
Selecting traffic information to display
Select the type of traffic information to display
with the navigation system.
1 Touch [Traffic/Info] in NAVI MENU, and
then touch [Traffic Settings].
The icon for the traffic information currently
being displayed appears on the screen.
2 Touch [Change].
The names of the displayed traffic information
items and a list of icons appears on the
screen.
3 Touch the traffic information item to
display.
A red tick appears next to the selected traffic
information.
p Touching [All] selects all the traffic informa-
tion.
p Touch [Back] to not add the selected traffic
information.
4 Touch [Done].
The selected traffic information icon is added
to the screen.