Installing The Programme - Pioneer AVIC-X3 Operation Manual

MAN-AVIC-X3-EN.book Page 122 Wednesday, June 6, 2007 10:15 AM

Installing the Programme

The programme is installed to the navigation sys-
tem using the application disc.
This is not necessary if your dealer already
performed the installation.
When installing the programme, you carry out
the following operations. When all the setup pro-
cedures are completed, you can use the naviga-
tion system.
1
Insert the disc while the vehicle is
parked.
2
Select the language used for the navi-
gation system.
3
Set the time difference.
1
Park your vehicle in a safe place.
Leave the engine on, and make sure that the
handbrake is applied.
2
Insert the Pioneer DVD Map Disc into the
disc loading slot of the navigation sys-
tem.
When the upgraded programme has been
found, installation of the programme starts
immediately.
Do not insert anything other than a disc
into the disc loading slot.
If you cannot insert a disc completely or if
an inserted disc is not recognised, check
that the label side of the disc is up. Press
the EJECT button to eject the disc, and
check the disc for damage before inserting
the disc again.
• Once the installation of the programme
starts, do not stop the engine of your vehi-
cle nor switch off the navigation system
until the installation is completed and the
following Map screen with current posi-
tion appears.
122
3
Touch "Yes/Oui/Ja".
When you start the navigation system for the
first time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the naviga-
tion system. If desired, you can select another
language as shown.
To keep English, touch "No/Non/Nein".
After this, proceed to Step 7.
When you want to select another lan-
guage, touch "Yes/Oui/Ja", and proceed
to the next step.
4
Select the language from the list.
Touch the language you want to use.
The language selected here is reflected for
the Navigation functions (e.g., Destination
search, etc.) only.
To change the language
Installation of the programme begins in the
language that you chose.
When the installation is complete, the open-
ing display appears.
Some time is needed until navigation is ready.
Page 64