NordicTrack Grt470 Manual page 8

8. Attach the Right Support Frame (33) and the Left
Support Frame (97) to the Weight Upright (9) with two
5/16Ó x 2 3/4Ó Bolts (89) and two 5/16Ó Nylon
Locknuts (64). Tighten all Nylon Locknuts used in
steps 6 through 8.
9. Slide the Butterfly Front Leg (3) onto the indicated
5/16Ó x 2 1/2Ó Carriage Bolts (92) in the Butterfly Base
(4). Hand tighten two 5/16Ó Nylon Locknuts (64) onto
the Bolts. Do not tighten the Nylon Locknuts yet.
10. Thread an Adjustment Handle (85) into the indicated
hole in the Butterfly Seat Frame (14).
Attach the Butterfly Seat Frame (14) to the Butterfly
Front Leg (3) with two 5/16Ó x 2 3/4Ó Bolts (89), two
5/16Ó Washers (36), and two 5/16Ó Nylon Locknuts
(64). Do not tighten the Nylon Locknuts yet.
Attach the Butterfly Seat Frame (14) to the Butterfly
Upright (1) with two 5/16Ó x 3 3/4Ó Bolts (66), two
5/16Ó Washers (36), and two 5/16Ó Nylon Locknuts
(64). Tighten all Nylon Locknuts used in steps 9
and 10.
8
33
9
3
4
10
14
85
36
89
8
9
64
89
97
64
89
64
92
66
36
1
64
36
64
64
3