Display Mode Speed/Tr2 (Trip Master 2); Setting Tr2 (Trip Master 2); Display Mode Speed/A1 (Average Speed 1) - KTM 125 EXC EU Owner's Manual

7 SPEEDOMETER
7.2.17

Display mode SPEED/TR2 (trip master 2)

7.2.18

Setting TR2 (trip master 2)

7.2.19

Display mode SPEED/A1 (average speed 1)

Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
–
Repeatedly press the button
play.
TR2 (trip master 2) runs constantly and counts up to 999.9.
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
400324-01
Briefly press the
button .
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
play.
–
Press the button
The displayed value can be set manually with the button
very practical function when riding using the road book.
Info
400324-01
The TR2 value can also be corrected manually during the journey with the but-
ton
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
Wait 10–12 sec-
onds
–
Repeatedly press the button
play.
A1 (average speed 1) shows the average speed calculated using TR1 (trip master 1) and
S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
for 2–3 seconds.
Briefly press the
400325-01
button .
Displays of TR1, A1 and S1 are reset to 0,0.
Next display mode
No function
No function
briefly until TR2 appears at the top right of the dis-
Clears the values TR2 and A2.
Next display mode
Reduces value of TR2.
Reduces value of TR2.
briefly until TR2 appears at the top right of the dis-
for 2–3 seconds until TR2 flashes.
and the button .
Increases value of TR2.
Increases value of TR2.
Reduces value of TR2.
Reduces value of TR2.
Saves and closes the Setup menu
briefly until A1 appears at the top right of the dis-
Displays of TR1, A1 and S1 are reset to 0,0.
Next display mode
33
and the button . This is a