Setting The Clock; Viewing The Lap Time - KTM 125 EXC EU Owner's Manual

7 SPEEDOMETER
7.2.5

Setting the clock

7.2.6

Viewing the lap time

Info
This function can only be opened if lap times have actually been timed.
–
Repeatedly press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
Info
If no button is pressed for 10–12 seconds, the settings are automatically
stored.
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the Setup
400318-01
menu is closed.
–
Repeatedly press the button
The selected function flashes.
Activating the function
–
Press the button
The symbol continues to appear in the display and the next function
appears.
Deactivating a function
–
Press the button
The symbol disappears in the display and the next function appears.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Wait 3–5 seconds
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
400330-01
Info
The seconds can only be set to zero.
If no button is actuated for 15–-20 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Briefly press the button
LAP 1 appears on the left side of the display.
–
The laps 1–10 can be viewed with the button
–
Press and hold the button
–
Briefly press the button
Next display mode
400321-01
Info
When a signal from the wheel speed sensor arrives, the left side of the dis-
play changes back to the SPEED mode.
briefly until H appears at the bottom right of the
for 2–3 seconds.
briefly until the desired function flashes.
.
.
briefly until CLK appears at the bottom right of the
for 2–3 seconds.
and/or button
and the button .
briefly until LAP appears at the bottom right of the
.
for 3–5 seconds to clear the lap times.
.
.
.
29