Display Mode Speed/A2 (Average Speed 2); Display Mode Speed/S1 (Stop Watch 1); Display Mode Speed/S2 (Stop Watch 2); Table Of Functions - KTM 125 EXC EU Owner's Manual

7 SPEEDOMETER
7.1.20

Display mode SPEED/A2 (average speed 2)

7.1.21

Display mode SPEED/S1 (stop watch 1)

7.1.22

Display mode SPEED/S2 (stop watch 2)

7.1.23

Table of functions

Display
Display mode SPEED/H
(service hours)
Setup menu
Unit of measurement
menu
Display mode SPEED/CLK
(time)
–
Press the button
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 is not
stopped after the ride.
Press the button
400326-01
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.
Press the button
Press the button
Press the button
400327-01
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
400328-01
Press the button
briefly.
Press the button . Press the button
No function No function
Activates the flashing Deactivates the flashing
display display
Starts selection, acti- Activates Mph display
vates Km/h display
No function No function
briefly and repeatedly until A2 appears at the top right of the
. No function
. No function
Displays of TR2, A2 and S2 are reset to 0,0.
Next display mode
briefly and repeatedly until S1 appears at the top right of the
. No function
. No function
Displays of TR1, A1 and S1 are reset to 0.0.
Next display mode
briefly and repeatedly until S2 appears at the top right of the
. Starts or stops S2.
. No function
Displays of S2 and A2 are reset to 0.0.
Next display mode
. Press the button
5 seconds.
The display changes to
the Setup menu of the
speedometer functions.
Setup menu starts,
stores the settings, and
changes to H or ODO.
Saves and closes the
Setup menu
The display changes to
the Setup menu of the
clock.
for 3 - Press the button
briefly.
Next display mode
Changes to the next dis-
play without changes
Changes to the next
display, changes from
selection to the Setup
menu
Next display mode
26