Display Mode Speed/Lap (Lap Time); Viewing The Lap Time; Display Mode Speed/Odo (Odometer); Display Mode Speed/Tr1 (Trip Master 1) - KTM 125 EXC EU Owner's Manual

7 SPEEDOMETER
7.1.13

Display mode SPEED/LAP (lap time)

7.1.14

Viewing the lap time

7.1.15

Display mode SPEED/ODO (odometer)

7.1.16

Display mode SPEED/TR1 (trip master 1)

–
Press the button
the display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues running after the button
tions are occupied.
Lap 10 must be timed using the button
Press the button
400320-01
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
Condition
• The motorcycle is stationary.
–
Press the button
the display.
–
Briefly press the button
Press the button
Press the button
Press the button
400321-01 for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
the display.
The total distance traveled is displayed in the ODO display mode.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
400317-01
briefly.
–
Press the button
display.
TR1 (trip master 1) runs constantly and counts to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to
0.0.
400323-01
Press the button
Press the button
Press the button
for 3 - 5 seconds.
briefly and repeatedly until LAP appears at the bottom right of
. Starts or stops the clock.
. Times the current lap time, stores it and the stop watch starts
the next lap.
The stop watch and the lap time are reset.
Next display mode
briefly and repeatedly until LAP appears at the bottom right of
.
. Select a lap from 1–10
. No function
No function
Next display mode
briefly and repeatedly until ODO appears at the bottom right of
. No function
. No function
No function
Next display mode
briefly and repeatedly until TR1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
is pressed, 9 memory loca-
.
24