NordicTrack E 15.0 Elliptical User Manual page 13

16. Untie and discard the wire tie on the Main Wire
(110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (110), to the Right and
Left Sensor Wires (63, 69), and to the Extension
Wire (150).
Insert the excess wire into the Upright (4) or into
the Console (7).
17. Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four #8 x 1/2"
Screws (124).
18. Orient the Rear Upright Cover (80) as shown.
While a second person holds the Rear Upright
Cover (80) near the Upright (4), connect the
Extension Wire (150) to the receiver wire (A).
Tip: Avoid pinching the wires. Attach the Rear
Upright Cover (80) to the Upright (4) with four #8
x 3/4" Screws (123).
16
7
110
17
124
18
80
150
13
63, 69
150
4
7
Avoid pinching
the wires
4
124
123
Avoid
pinching
the wires
123
4
A