NordicTrack E 15.0 Elliptical User Manual page 26

HOW TO USE THE EQUIPMENT SETTINGS MODE
The console features an equipment settings mode
that allows you to select a language and the unit of
measurement, to turn on and turn off the display demo
mode, and to enable or disable street view and the
Internet browser.
1. Select the settings main menu.
First, turn on the console (see step 1 on page
21). Next, select the main menu (see step 2 on
page 21). Then, touch the Gears button at the
bottom of the screen to select the settings main
menu.
2. Select the equipment settings mode.
In the settings main menu, touch the Equipment
Settings button.
3. Select a language.
To select a language, touch the Language button
and select the desired language. Then, touch the
Back button on the screen to return to the equip-
ment settings mode. Note: This feature may not be
enabled.
4. Turn on or turn off the display demo mode.
The console features a display demo mode,
designed to be used if the elliptical is displayed
in a store. While the demo mode is turned on, the
screen will show a demo presentation.
To turn on or turn off the display demo mode, first
touch the Demo Mode button. Next, touch the On
checkbox or the Off checkbox. Then, touch the
Back button on the screen.
5. Enable or disable a passcode.
The console features a child safety passcode,
designed to prevent unauthorized users from using
the elliptical.
Touch the Passcode button. To enable a passcode,
touch the Enable checkbox. Then, enter a 4-digit
passcode of your choice. Touch Save to use this
passcode. Touch Cancel to return to the equipment
settings mode and not use a passcode. To disable
the passcode, touch the Disable checkbox.
Note: If a passcode is enabled, the console will
regularly ask for you to enter the passcode. The
console will remain locked until the correct pass-
code is entered. IMPORTANT: If you forget your
passcode, enter the following master passcode
to unlock the console: 1985.
6. Enable or disable street view.
During some workouts, the screen may show a
map. To enable or disable the street view feature of
the maps, first touch the Street View button. Next,
touch the Enable checkbox or the Disable check-
box. Then, touch the Back button on the screen.
7. Select the unit of measurement.
Touch the US/Metric button to view the selected
unit of measurement. Change the unit of measure-
ment, if desired. Then, touch the Back button on
the screen.
8. Enable or disable the safety key.
This feature is not be enabled on your elliptical.
Your elliptical does not have a safety key.
9. Enable or disable the Internet browser.
To enable or disable the Internet browser, first
touch the Browser button. Next, touch the Enable
checkbox or the Disable checkbox. Then, touch the
Back button on the screen.
10. Exit the equipment settings mode.
To exit the equipment settings mode, touch the
Back button on the screen.
26