NordicTrack E 15.0 Elliptical User Manual page 29

HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Locate the audio wire. Plug one end into the audio
jack on the console. Then, plug the other end into a
jack on your MP3 player, CD player, or other personal
audio player. Make sure that the audio wire is fully
plugged in.
Next, press the play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume level on your personal audio player or press
the Vol increase and decrease buttons on the console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface instead of on the console.
Note: The USB port on the console is for firmware
updates only.
HOW TO USE THE INTERNET BROWSER
Note: To use the Internet browser, you must have
access to a wireless network including an 802.11b/n
router with SSID broadcast enabled (hidden networks
are not supported).
To open the Internet browser, touch the Globe button at
the bottom of the screen. Then, select a website.
To return to the previous web page, press the Back
button on the screen or touch the Browser Back button
on the screen. To exit the Internet browser, touch the
Home button or touch the Return button on the screen.
To use the keyboard, see HOW TO USE THE TOUCH
SCREEN on page 19.
To enter a different web address in the URL bar, first,
slide your finger down the screen to view the URL bar,
if necessary. Then, touch the URL bar, use the key-
board to enter the address, and touch the Go button.
Note: While you are using the Internet browser, the
resistance, incline, fan, and volume buttons will still
function, but the workout buttons will not function.
Note: If you have questions after following these
instructions, go to www.iFit.com/support for
assistance.
29