Aligning Drive Rolls And Wire Guide - Miller Millermatic 252 Owner's Manual

7-4. Aligning Drive Rolls and Wire Guide

Tools Needed:
OM-230 693 Page 32
.
A complete Parts List is available at www.MillerWelds.com
Correct
4
3
2
1
Incorrect
5
!
Turn Off power.
View is from top of drive rolls
looking down with pressure
assembly open.
1 Drive Roll Securing Nut
2 Drive Roll
3 Wire Guide
4 Welding Wire
5 Drive Gear
Insert screwdriver, and turn screw
in or out until drive roll groove lines
up with wire guide.
Close pressure roll assembly.
Ref. 800 412-A