Aligning Drive Rolls And Wire Guide - Miller MigMatic CE 260i Owner's Manual

4-9.

Aligning Drive Rolls And Wire Guide

4-9. Aligning Drive Rolls and Wire Guide
Correct
Incorrect
Incorrect
Tools Needed:
5
Ref. 800412-A
OM-287348 Page 20
Correct
4
3
2
1
Incorrect
5
Ref. 800412-A
Turn off and disconnect input
power.
View is from top of drive rolls looking down
with pressure assembly open.
1 Drive Roll Securing Nut
2 Drive Roll
3 Wire Guide
4 Welding Wire
5 Drive Gear
Insert screwdriver, and turn screw in or out
until drive roll groove lines up with wire
guide.
Close pressure roll assembly.
OM-287348 Page 21