Section 5 − Installation; Serial Number And Rating Label Location; Selecting A Location - Miller Millermatic 252 Owner's Manual

5-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output.
For future reference, write serial number in space provided on back cover of this manual.

5-2. Selecting A Location

Tipping
!
Do not move or operate
unit where it could tip.
Location
18 in.
(460 mm)
.
A complete Parts List is available at www.MillerWelds.com
SECTION 5 − INSTALLATION
18 in.
(460 mm)
1
1 Line Disconnect Device
Locate unit near correct input
power supply.
!
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
loc_2 3/96 - Ref. 804 912-A
OM-230 693 Page 13