Installation; Fritz!Card Pci Hardware Installation And Connection To Isdn - AVM FRITZ!Card PCI Installation Manual

2 Installation

FRITZ!Card PCI can be installed in the operating systems Win-
dows XP, Windows Me, Windows 2000 and Windows 98.
In some operating systems the display of menus and folders
can be changed. The following instructions are based on the
standard installation of each operating system.
FRITZ!Card PCI is installed in two steps:
Physically installing the AVM ISDN-Controller FRITZ!Card
PCI in the computer and connecting it to ISDN.
Installing the software components of FRITZ!Card PCI
using a joint installation program.
2.1 FRITZ!Card PCI Hardware Installation
and Connection to ISDN
Proceed as follows to install FRITZ!Card PCI and connect it to
ISDN.
1. Switch off your computer and any connected devices
and then unplug the power supply.
2. Loosen the screws of the computer housing and open
the computer.
3. Select a free PCI slot and remove the blanking plate
from the top end of the slot.
4. Insert the ISDN-Controller FRITZ!Card PCI into the slot,
connector strip first, until the card is positioned firmly.
FRITZ!Card PCI – 2 Installation
Installation
9