What Is Installed - AVM FRITZ!Card PCI Installation Manual

2.2 What Is Installed?

During the initial installation, the installation program sets
up the following software components:
the driver software for FRITZ!Card PCI
The driver software for the ISDN-Controller FRITZ!Card
PCI is loaded automatically when Windows is started.
The exact steps taken to install the driver software dif-
fer among the operating systems Windows XP, Me, 98
and 2000. Read the section that describes the driver
software installation for your operating system.
the FRITZ! communications software
See the section "The Many Facets of FRITZ!" on page 28
for more information.
AVM ISDN CAPI Port Driver
See the section "ISDN and the Internet with Windows
System Services" on page 33 for more information.
the AVM ISDNWatch program, software for monitoring
ISDN activities
See the section "Blocking Numbers With ISDNWatch"
from page 29 for more information.
If you already have individual software components such as
FRITZ! installed, read the instructions in section "Installing
Individual Software Components" on page 20.
In the section "Where to Find What After Installation" on
page 19 you will find information about the locations of the
various software components on your computer after instal-
lation.
Once installation is complete, additional AVM system drivers
and software may be installed for online services (see the
section "ISDN and the Internet with Windows System Servic-
es" on page 33).
What Is Installed?
FRITZ!Card PCI – 2 Installation 11