Ready To Receive On Standby - AVM FRITZ!Card PCI Installation Manual

CAPI SoftCompression X75/V42bis
CAPI SoftCompression X75/V42bis
The driver software for the ISDN-Controller FRITZ!Card PCI
supports data compression as per V.42bis for X.75 connec-
tions in accordance with the CAPI standard. Connection
times and costs can be reduced considerably with this type
of data compression. Data compression is activated or deac-
tivated at the request of an ISDN application such as
FRITZ!data.
CAPI SoftFax G3
The driver software allows FRITZ!Card PCI to be used with all
CAPI-based Windows fax applications. FRITZ!Card PCI sup-
ports transmission and reception of faxes at a rate of up to
14,400 bit/s. The ISDN-Controller FRITZ!Card PCI sends and
receives like a G3 fax machine.
CAPI SoftModem V32bis
FRITZ!Card PCI also provides the CAPI SoftModem V32bis
feature. On the basis of this modem emulation, it is possible
to connect from an ISDN access to any analog remote party
with a modem connected to the telephone network.

5.3 Ready to Receive on Standby

If your computer supports ACPI (Advanced Configuration
Power Interface), you can take advantage of the energy-sav-
ing features of standby and hibernation.
In standby mode incoming calls can "wake" the computer so
that the voice message or fax can be accepted. Once the call
has been completed, the computer returns to standby mode.
This mode can only be used when a corresponding program
is started, such as FRITZ!, and if the computer supports APCI.
Incoming calls and faxes cannot be accepted in hibernation
mode!
Standby and hibernation differ in the following ways:
FRITZ!Card PCI – 5 How FRITZ!Card PCI Works 39