Avm Isdn Capi Port Driver Installation - AVM FRITZ!Card PCI Installation Manual

AVM ISDN CAPI Port Driver Installation

2.8 AVM ISDN CAPI Port Driver
18 FRITZ!Card PCI – 2 Installation
Installation
Upon conclusion of the FRITZ! communications software in-
stallation, you can install the AVM ISDN CAPI Port Driver. A
window with four settings pages is displayed:
Modems
Select here the CAPI Port modems you would like to in-
stall, such as "AVM ISDN Internet (PPP over ISDN)" for a
connection to an Internet Service Provider using Win-
dows' Dial-Up Networking. View information about the
individual modems by clicking a modem and then
pressing "F1".
Port
On this settings page you can assign specific COM ports
to the virtual modems. If no special COM port settings
are required in your system, simply confirm the default
settings.
MSN
On this settings page you may separate the online
charges from the charges for voice connections. To use
this option, an MSN must be entered on the "MSN" set-
tings page. Online connections then will be charged to
this number.
AVM Test Connection / Fast Internet over ISDN
Define here whether two new connections should be
configured in Dial-Up Networking during installation of
the AVM ISDN CAPI Port Driver: AVM Fast Internet and
AVM Intranet. Dial-Up Networking must already be in-
stalled on your computer.
These connections are only designed to check that the
program functions properly. They cannot be used to
establish a connection to the Internet.
This completes software installation for the FRITZ!Card PCI.
Restart your computer.