Installing The Communications Software Fritz - AVM FRITZ!Card PCI Installation Manual

5. As a final step of the driver software installation, a mes-
sage box is displayed showing the configuration of the
ISDN-Controller FRITZ!Card PCI.
Once the driver software installation has been completed, a
message reports that the FRITZ! communications software
can be installed. For more information, read "Installing the
Communications Software FRITZ!" on page 17.
Windows 98 includes an "ISDN Configuration" wizard. This
Wizard can be used neither to install ISDN hardware and
software correctly, nor to set up an ISDN connection. It can
only be used to configure a previously installed AVM ISDN
NDIS WAN CAPI driver (one of the AVM system drivers).
2.7 Installing the Communications
Software FRITZ!
1. The welcome screen of the FRITZ! installation appears.
Click "Next".
2. Specify the folder in which the FRITZ! communications
software is to be installed on your computer.
3. The next step is to specify the program folder for FRITZ!
in the Start menu.
4. The next dialog asks whether you would like to perform
a simple installation or an installation with configura-
tion.
Installation: The FRITZ! modules are installed with
default settings in the specified folder. All program
settings can be changed in the individual FRITZ!
modules after installation. Please see the Online Help
for instructions.
Installation with Configuration: A number of basic
settings can be made during installation, for example,
information for operation at a PBX.

Installing the Communications Software FRITZ!

FRITZ!Card PCI – 2 Installation 17