Installing The Driver Software In Windows Xp - AVM FRITZ!Card PCI Installation Manual

Installing the Driver Software in Windows XP

2.3 Installing the Driver Software in
12 FRITZ!Card PCI – 2 Installation
Windows XP
Administrator rights are required to install the driver
software in Windows XP Professional.
Once the FRITZ!Card PCI has been inserted in your computer,
proceed as follows:
1. Switch on your computer.
2. The driver software for the FRITZ!Card PCI is already con-
tained in the Windows XP operating system and is in-
stalled automatically when the computer is started.
3. A message in the task bar indicates that FRITZ!Card PCI
was found and has been installed. This message disap-
pears after a few seconds.
Windows XP has detected new hardware
4. To check that the FRITZ!Card PCI installation was suc-
cessful, open the "Device Manager" by clicking through
"start / Control Panel / Performance and Maintenance /
System / Hardware / Device Manager". Double-click
"Network adapters". The list contains the entry "AVM
ISDN-Controller FRITZ!Card PCI".
This concludes installation of the FRITZ!Card PCI drivers de-
livered with the hardware in Windows XP. FRITZ!Card PCI is
now ready for immediate operation.
To make sure that the latest version of these drivers is in-
stalled, it may be necessary to update the drivers with the in-
stallation program included on the FRITZ!Card PCI installa-
tion CD:
1. Insert the FRITZ!Card PCI CD and run the program SET-
UP.EXE in the WINDOWS.XP folder.
The installation program for FRITZ!Card PCI starts.