Installing Individual Software Components; How To Perform An Update Of The Driver Software - AVM FRITZ!Card PCI Installation Manual

Installing Individual Software Components

2.10 Installing Individual Software
2.11 How to Perform an Update of the
20 FRITZ!Card PCI – 2 Installation
used by the ISDN-Controller. All connection charges accrued
are listed and compiled in the statistics. For details, see the
section "Blocking Numbers With ISDNWatch" on page 29.
Components
Certain software components may already be installed on
your computer, such as FRITZ!, for example. In this case you
may want to install only certain individual components from
the product CD. You can do so as follows:
To install the FRITZ!Card PCI driver software, open the
README.DOC file in the folder named for your
<OPERATING SYSTEM> on the CD, and follow the instruc-
tions it contains.
To install the FRITZ! communications software, run the
program file SETUP.EXE in the folder SOFTWARE/FRITZ!
on the installation CD.
The AVM ISDN CAPI Port Driver is installed using the
SETUP.EXE file located in the SOFTWARE\CAPIPORT\
CAPIPORT.<OPERATING SYSTEM>\<LANGUAGE> folder on
the CD.
The CD_INFO.HTM file in the root directory of the FRITZ!Card
PCI CD lists the contents of the CD.
Driver Software
AVM continuously extends the functionality of the driver
software for your FRITZ!Card PCI. To ensure that your installa-
tion of FRITZ!Card PCI is always up to date, you should install
new driver software whenever new drivers are made avail-
able. To do so, proceed as follows:
1. Open the following Internet page:
www.avm.de/en/download