Installing The Driver Software In Windows Me - AVM FRITZ!Card PCI Installation Manual

2. In its sign-on window, select your language and click
"Continue".
3. In the next dialog, select "Update" and confirm by click-
ing "Continue".
4. In the next dialog Windows may indicate that you are
about to install software not digitally signed by Mi-
crosoft. This prompt depends on the driver signature
options set on your computer. Answer the prompt with
"Continue Anyway". Repeat this procedure in the next
dialog for the AVM ISDN NDIS WAN CAPI Driver.
5. The next window informs you that the drivers have been
updated successfully. Click "Finish" to end the installa-
tion.
6. Answer "No" in the next dialog so that your computer
will not be rebooted.
This concludes the update of the FRITZ!Card PCI driver soft-
ware.
In the next step, install the FRITZ! communications software.
For more information, see the section "Installing the Commu-
nications Software FRITZ!" on page 17.
2.4 Installing the Driver Software in
Windows Me
Once the FRITZ!Card PCI has been inserted in your computer,
proceed as follows:
1. Start the computer and then insert the FRITZ!Card PCI
CD.
2. The "Add New Hardware" wizard recognizes a new Plug
& Play device to be installed.
3. When asked: "What would you like to do?", select the
option "Automatic search for a better driver (Recom-
mended)."
4. Select the entry <CD-ROM DRIVE>:\WINDOWS.ME\
FPCISET.INF in the list of entries found and confirm with
"OK".

Installing the Driver Software in Windows Me

FRITZ!Card PCI – 2 Installation 13