Where To Find What After Installation - AVM FRITZ!Card PCI Installation Manual

Errors During Installation: What to Do
If errors occurred during installation and the software com-
ponents of FRITZ!Card PCI were not installed correctly, pro-
ceed as follows:
1. Remove all of the installed FRITZ!Card PCI components
by following the instructions in the sections "Removing
Software in Windows XP" on page 23, "Removing Soft-
ware in Windows Me and 98" on page 24 or "Removing
Software in Windows 2000" on page 25, respectively.
2. Restart your computer.
3. Repeat the complete software installation.
If you want to install individual FRITZ!Card PCI software
components, please read the instructions in the section
"Installing Individual Software Components" on page 20.

2.9 Where to Find What After Installation

After installation with default settings you will find the soft-
ware components of FRITZ!Card PCI at the following loca-
tions:
The entry "AVM ISDN-Controller FRITZ!Card PCI" is included
in the Device Manager.
The FRITZ! modules are contained in the "FRITZ! ISDN and In-
ternet" icon on your desktop as well as in the "FRITZ!" pro-
gram group. For information on features and operation of the
FRITZ! modules, please see the chapter "FRITZ!: Internet and
ISDN Software" on page 27.
If you have installed the AVM ISDN CAPI Port Driver, a link to
the Help file for the ISDN CAPI Port Driver is created on your
desktop.
The ISDNWatch program is located in the "Startup" folder of
the Start menu. This program monitors and logs the B-chan-
nel activities of your FRITZ!Card PCI. The ISDNWatch icon in
the task bar indicates the operation status of the B channels
Errors During Installation: What to Do
FRITZ!Card PCI – 2 Installation 19