Table of Contents
Advertisement
INSTALLATION
Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into
the DIN Frame
1.
Insert the mounting frame into the DIN Mount Bracket and retain it by bending back the
relevant fixing tabs. Use all 6 tabs, if necessary, to hold it in place.
Figure 13 Mounting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame
MTM5400 Mobile Terminal Installation Manual
The tabs are easily bent back by twisting a large flat-
bladed screwdriver into the slot behind the tabs.
For a more secure installation the top and rear of the
frame should also be secured with screws.
The demount tool can be used as an aid to mounting as
well as demounting.
43
Advertisement
Table of Contents
