Wall Mounting On Din Rail - Motorola MOSCAD-M Owner's Manual

It is also possible to attach the MOSCAD-M to the wall using the small screw hole at the
bottom of case, though this requires dismantling the RTU, which is generally discouraged.
Consult Motorola service personnel before opening the MOSCAD-M casing. To mount the
RTU:
1. Open the case and dismantle the parts of the MOSCAD-M.
2. Secure the back of the case against the wall using a screw whose diameter is less than
3.5 mm and head size is at least 5.5 mm.
3. Reassemble the parts of the MOSCAD.
Before beginning any disassembly or reassembly procedures, you
should be adequately grounded to prevent damage to static sensitive
devices in the unit.

Wall Mounting on DIN Rail

For mounting the RTU on a DIN rail, two universal foot elements (Phoenix Connectors MFC
PIN UMK-FE) are required. To mount the unit, proceed as follows:
1. Slide the two foot elements into the recesses on the back cover of the unit as shown in
Figure 4. Press until they click behind the snaps that secure their placement. (See zoomed
image in Figure 5.)
Figure 3
Installation of MOSCAD
5
M – Screw Mount
-
Installation