Table of Contents
Advertisement
38
Desktop Installation
The MTM5400 may be desktop mounted. The Desktop Station option provides the terminal with the
desk microphone, power supply, desk top tray (without speaker) and external loudspeaker.
Planning
Planning is the key to fast, easy terminal installation. Before a hole is drilled or a wire is run, inspect
the location and determine how and where you intend to mount the antenna, terminal and
accessories. Plan wire and cable runs to provide maximum protection from pinching, crushing, and
overheating. The installation planning should only be undertaken by persons who are competent
and able to ensure that the complete installation fulfils its regulatory requirements, such as EMC
(Electro Magnetic Compatibility) and IEC (International Electrotechnical Commission).
Installation
1.
Be sure line voltage power is available.
2.
Make sure sufficient air can flow around the terminal to permit adequate cooling.
3.
Choose a flat surface for the desktop tray and external loudspeaker.
4.
Be sure the mounting surface is able to adequately support the weight of the terminal and
tray.
5.
If an outdoor antenna is used choose a location for the terminal as close as possible to the
antenna cable inlet of the building. Make sure that the installation of the surge protector is in
accordance with the manufacturer's specifications and safety hints. The line voltage power
supply shall be grounded properly.
MTM5400 Mobile Terminal Installation Manual
If an outdoor antenna is used a proper grounded Lightning
Protector with Quarter-Wave Shorting Stub must be
inserted between the outdoor antenna and the transceiver
antenna input. The line voltage power supply shall have a
proper ground connection (refer to IEC61312-1). The
installation must meet the requirements of any and all
applicable local codes and regulations.
INSTALLATION
Advertisement
Table of Contents
