Table of Contents
Advertisement
INSTALLATION
Installing the Remote Mount Enhanced Control Head onto the Remote Mount
Trunnion
1.
Slide the Remote Mount Enhanced Control Head onto the mounting trunnion until it snaps
into place.
2.
Tighten the screws at both sides of the trunnion. After a few turns, tilt the control head for an
optimum view of the display. Then, complete the tightening of the screws.
1
Figure 11 Remote Mount Enhanced Control Head Installation with Remote Mount Trunnion
Table 5
Item
1 & 2
Remote Mount Trunnion Kit
MTM5400 Mobile Terminal Installation Manual
Remote Mount Enhanced Control Head Installation with Remote Mount Trunnion
- Mechanical Parts List for Installation
Description
41
1
2
Part Number
PMLN4912
Advertisement
Table of Contents
