Table of Contents
Advertisement
INSTALLATION
Terminal Installation
Enhanced Control Head Installation
The Enhanced Control Head can be removed from the housing and turned to any position within a
180° radius. This provides multiple mounting options for the terminal. For example, the terminal may
be mounted on either side of the vehicle to facilitate the safest and most ergonomically ideal
position. The Enhanced Control Head may then be turned to provide the most convenient access.
To reposition the Enhanced Control Head:
1.
Insert the dismantling tool (Motorola P/N 6686119B01
Control Head and the terminal assembly as shown in the figure below.
2.
Press on the dismantling tool until the snap connectors on the side of the Enhanced Control
Head release from the terminal assembly.
3.
Pull the Enhanced Control Head away from the terminal assembly.
Dismantling
Tool
MTM5400 Mobile Terminal Installation Manual
Figure 3 Typical Control Head Removal
in the groove between the Enhanced
)
ZWG0130209-O
31
Advertisement
Table of Contents
