Yamaha TT-R125(P) Owner's Service Manual page 39

Part number
YM-1312-A, 90890-01312
YU-33270-B, 90890-01362
YM-33963, 90890-01367
YM-33281, 90890-01400
YU-33975, 90890-01403
YS-1880-A, 90890-01701
YU-3112-C, 90890-03112
YU-8036-B
90890-03113
YM-4019, 90890-04019
YM-91042, 90890-04086
Tool name/How to use
Fuel level gauge
This gauge is used to measure the fuel level in the
float chamber.
Flywheel puller
This tool is used to remove the rotor.
Fork seal driver weight
Fork seal driver attachment
These tools are used to installing the fork oil seal.
Steering nut wrench
This tool is used when tighten the steering ring nut to
specification.
Sheave holder
This tool is used for when loosening or tightening the
flywheel magneto securing nut.
Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
Inductive tachometer
Engine tachometer
This tool is needed for observing engine rpm.
Valve spring compressor
This tool is needed to remove and install the valve
assemblies.
Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
SPECIAL TOOLS
YM-1312-A
YU-33270-B
YM-33963
YM-33281
YU-33975
YS-1880-A
YU-3112-C
YU-8036-B
YM-4019
YM-91042
1 - 7
GEN
INFO
Illustration
90890-01312
90890-01362
90890-01367
90890-01400
90890-01403
90890-01701
90890-03112
90890-03113
90890-04019
90890-04086