Yamaha TT-R125(P) Owner's Service Manual page 182

FRONT BRAKE ADJUSTMENT
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have disap-
peared.
j. Add brake fluid to the level line on the
Check the operation of the brake after
bleeding the brake system.
3. Install:
FRONT BRAKE ADJUSTMENT
TT-R125
1. Check:
2. Adjust:
Brake lever free play adjustment steps:
Loosen the locknuts 1.
Turn the locknuts until free play a is
within the specified limits by changing their
tightening position.
Tighten the locknuts.
NOTE:
For minute adjustment, loosen the locknut 2
on the lever side and adjust with the adjuster
3.
CAUTION:
Make sure that there is no brake drag after
adjusting the brake lever free play.
3 - 16
reservoir.
WARNING
Diaphragm
Brake master cylinder cap
Brake lever free play a
Out of specification
Brake lever free play a:
10 ~ 15 mm (0.39 ~ 0.59 in)
Brake lever free play
INSP
ADJ
Adjust.