TRENDnet 14dBi User Manual page 67

Hostname : The Hostname of the WAN port

Static IP : Users can manually setup the WAN IP address with a static IP provided by WISP.

IP Address : The IP address of the WAN port. By default, the IP address is 192.168.1.254

IP Netmask : The Subnet mask of the WAN port. By default, the Netmask is 255.255.255.0

IP Gateway : The default gateway of the WAN port. By default, the Gateway is 192.168.1.1

PPPoE : To create wireless PPPoE WAN connection to a PPPoE server in network.

User Name : Enter User Name for PPPoE connection

Password : Enter Password for PPPoE connection

Reconnect Mode :

Always on – A connection to Internet is always maintained.

On Demand – A connection to Internet is made as needed.

When the "Reconnect Mode" is set to "On Demand", if the "System Time" NTP Client is enabled, the device's Reconnect
Mode would become "Always On"
Manual – Click the "Connect" button on "WAN Information" in the Overview page to connect to

the Internet.
Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time

in minutes.
MTU : By default, it's 1492 bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for a

correct MTU setting.
TEW-455APBO High Power Wireless Outdoor PoE Access Point
64
User Manual