TechniSat DigiCom 1A Instruction Manual page 43

Table of Contents

Advertisement

Input level GREEN
Input level BLUE
Teletext filtering
Entry teletext data
TV SCART:
Output
VCR SCART:
Input
Output
Serial Interface RS 232:
Type
Bitrate
Connection
Function
PLL Modulator:
Output range
Antenna input
Input impedance
Antenna output
Output impedance
LNB power supply:
LNB power
LNB voltage vertical
LNB voltage horizontal
22-kHz Modulation:
Programme memory/ Satellite positions:
No. of programmes user list TV:
No. of programmes user list Radio: 999 radio programmes
Number of Programmes:
Bouquet lists TV/Radio
Number of active satellite positions:
Max. 4 (DiSEqC 1.0, SAT POSITION/ SAT OPTION)
Total number of satellite positions:
One home transponder is stored in memory for each of the 32 satellite positions. This trans-
ponder facilitates automatic channel/programme search on each satellite position.
EPG Data:
EPG preview
Memory capacity
Timer:
Events
Remote Control System RC-5
Sub-system address
Modulation frequency
Infrared wavelength
0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
in accordance with standard ETS 300 472
(FBAS) corresp. to ITU-R BT.653-2; lines: 6-22 and 320-335
FBAS with RGB, or only FBAS, or only S-VHS (switchable)
FBAS with RGB or S-VHS
FBAS or S-VHS
RS 232 bi-directional
Max. 115.2 Kbit/s
9-pin D-SUB connector
Pre-programming and updating operational software
UHF channels 21 to 69
47....862 MHz
75 Ohm
47...862 MHz
75 Ohm
Max. 400 mA, double-insulated
<14.0 V no load, 11.5 V at 400 mA
<20 V no load, >17.5 V at 400 mA
LNB switched off in Standby mode
22 kHz, amplitude 0.6 V +/- 0.2 V
999 TV programmes
total of 4000 programmes possible in bouquet lists
32
Maximum 7 days in advance
300 kBytes
Programmable for a maximum of 50 programmes
Maximum 128 events, one year in advance
8 (SAT 1), switchable to sub-system address 10 (SAT 2)
36 kHz
950 nm
43
(F1 to F999)
(r1 to r999)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digicom 1 plus

Table of Contents