Unsupported Mpls Vpn Commands; Unsupported Ppp Commands; Spectrum Management Commands; Unsupported Telco-Return Commands - Cisco uBR10012 Troubleshooting Manual

Universal broadband router
Hide thumbs Also See for uBR10012:
Table of Contents

Advertisement

Appendix A
Unsupported Commands

Unsupported MPLS VPN Commands

The following commands are not supported in any Cisco IOS software release.

Unsupported PPP Commands

The following commands are not supported in any Cisco IOS software release.

Spectrum Management Commands

The following commands are supported in Cisco IOS Release 12.2(8)BC2 and later 12.2 BC releases.
These commands are not supported in previous releases.

Unsupported Telco-Return Commands

The following commands are not supported in any Cisco IOS software release.
OL-1237-01
ip vrf
ip vrf forwarding
mpls ip
mpls label-protocol ldp
show ip protocols vrf
show ip vrf
show ip route vrf
compress [predictor | stac | mppc [ignore-pfc]]
debug ppp cbcp
ppp bridge appletalk
ppp bridge ip
ppp bridge ipx [novell-ether | arpa | sap | snap]
ppp reliable-link
cable upstream hop-priority
cable upstream threshold
show cable modem [ip-address | interface | mac-address] snr
show controllers cable upstream spectrum
cable telco-return enable
cable telco-return interval
cable telco-return spd dhcp-authenticate
cable telco-return spd dhcp-server
cable telco-return spd dial-timer
Cisco uBR10012 Universal Broadband Router Troubleshooting Guide
Unsupported MPLS VPN Commands
A-3

Advertisement

Table of Contents
loading

Table of Contents