How To Clean The Filter - Maytag MAV3700AWW Instruction Manual

HOW TO CLEAN THE FILTER

Cleaning the Lint Filter
1
Pull the cap agitator
1 Pull the Fiter frame up-
upward.
ward.
Cleaning the water inlet filter
• Clean the filter when water leaks from, the water inlet.
1 Pull the power
plug out before
cleaning it.
Cleaning the drain filter
• In case "Pump-Model" drain hose, this filter's equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could
be caused.
1 Bring down the remaining
water in the hose. And
put a container under the
filter to collect water.
4 Clean the drain filter
removing foreign objects.
2
Pull the filter lint
2 Turn the lint filter inside
upward.
fout, wash to the lint of
with water
Lint Filter
2 Turn off the water
supply to the
washer and
sperate the inlet
hose.
2 Turn the cap counter
clockwise.
5 Put the filter into the case.
And turn the cap to adjust
the prominence of the filter
to the hole of the case.
13
3
Turn the filter lint
3 Return the filter as it was,
upside down, wash to
and insert the filter frame
the lint off with water.
into the slot
Filter Frame
3 Pull the inlet filter
out.
3 Pull out the filter assembly
off the case.
6 Turn the cap clockwise
tightly.
4
Return the filter assy as
it was, and insert it into
the pulsator agitator.
4 Remove the dirt
from the inlet
filter with a brush.