Enhanced Transmission Selection (Ets) - Mellanox Technologies Mellanox SX1018 User Manual

Ethernet managed blade switch
Hide thumbs Also See for Mellanox SX1018:
Table of Contents

Advertisement

Choose the desirable priority you want to enable using the command
Step 4.
priority <pri[0..7]> enable
switch (config) # dcb priority-flow-control priority 5 enable
 To enable PFC per interface:
Log in as admin.
Step 1.
Change to config mode. Run:
Step 2.
switch > enable
switch # configure terminal
Enable PFC globally on the switch. Run:
Step 3.
switch (config) # dcb priority-flow-control enable
Choose the desirable priority you want to enable using the command
Step 4.
priority <pri[0..7]> enable
switch (config) # dcb priority-flow-control 5 enable
Change to Interface mode. Run:
Step 5.
switch (config) #
switch (config) # interface ethernet 1/1
switch (config interface ethernet 1/1) #
Enable PFC for the specific interface:
Step 6.
switch (config interface ethernet 1/1) # dcb priority-flow-control mode on
5.8.2

Enhanced Transmission Selection (ETS)

Enhanced Transmission Selection (ETS) provides a common management framework for assign-
ment of bandwidth to traffic classes, for weighted round robin (WRR) scheduling. If a traffic
class does not use all the bandwidth allocated to it, other traffic classes can use that available
bandwidth. This allows optimal utilization of the network capacity while prioritizing and provid-
ing the necessary resources.
The ETS feature has the following attributes:
• ETS global admin:
• Enable (default) – scheduling mode is WRR according to the configured bandwidth-per-
traffic class
• Disable – scheduling mode is Strict Priority (SP)
• Bandwidth percentage for each traffic class: By default each traffic class gets an equal
share
The default mapping of priority to traffic classes (per interface) is as follows:
• Priority 0,1 mapped to tc 0
• Priority 2,3 mapped to tc 1
• Priority 4,5 mapped to tc 2
• Priority 6,7 mapped to tc 3
ETS is enabled by default (scheduling is WRR).
 To set the scheduling mode to Strict Priority:
.
Mellanox Technologies Confidential
dcb priority-flow-control
dcb priority-flow-control
Mellanox Technologies
77
Rev 1.6.9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx1018hp

Table of Contents