HP Integrity Superdome 2 16-socket Service Manual page 67

No status | Firmware Information
Normal | Memory
Normal | Management Processor
No status | Partition Information
No status | Memory Utilization
No status | Process Information
No status | Boot Device Configuration
No status | Crash Dump Configuration
Normal | FC HBA
Normal | IOTree
Minor | Network Information
****************************************
#
# cprop -summary -c component – Displays summary information for all the instances
of all the components.
# cprop -summary -c Memory
[Component]: Memory
[Table]: Logical memory information
-------------------------------------------------------
[Partition Management]: Enclosure Partition Management
(http://16.119.65.247/?view=npartition&nparid=1&tab=cpu_and_memory)
[Total Available Memory]: 127.78 GB
-------------------------------------------------------
[Table]: Physical memory information
-------------------------------------------------------
[Device Bay Information]: Bay 1
For detailed information , see <link>.:http://16.119.65.247/?view=blade&encid=1&bladeid=1
[Device Bay Information]: Bay 2
For detailed information , see <link>.:http://16.119.65.247/?view=blade&encid=1&bladeid=2
-------------------------------------------------------
#
# cprop -summary -c Processors
****************************************************
[Instance]: 1
****************************************************
[Hash ID]: Processors:b3121cafx68a81cc5
[Status]: Dormant
[DeviceID]: 31
[Tag]: 1-0-ff-2-ff-1-ff-11
[Location]: This is an Intel(R) Itanium(R) 2 Processor-Module ( Model: Intel (R) Itanium
2 Processor (Family 32 Model 2 stepping E0) ), with the following details:
Number 0, Back Plane Number 255, Cell Slot Number 2, Slot Number 1.
[Processor Type]: Intel(R) Itanium(R) 2 Processor-Module
[Architecture Revision]: Itanium Arch.
[Firmware ID]: 004.040.000
[Processor Capability]: 64 Bits
[Processor Speed]:
****************************************************
listtest – Lists all available basic tests available.
cprop
cprop -listtest -c component – Lists all test available to the component.
cprop -listtest -c Processors
****************************************************
[Hash ID]: Processors:80fe8671xbf8a74ad
[Test Name]: HP:CpuDiag
[Description]: The CpuDiag is a diagnostic to do CPU Test.
****************************************************
cprop runtest
Runs the basic test on all the instances of all of the supported components.
Example:
# cprop -runtest
[Component]: Software Bundles
Health test is not supported.
Cabinet Number 1, Card Cage
Troubleshooting tools 67